ARDUINO
-
Arduino Pro Mini-ATMEGA 328P/5V 16Mhz
This is Pro Mini 5V/16MHz is a 5V running the 16MHz boot-loader. Pro Mini ATMEGA328P come without connectors. Its a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off-board. The Pro Mini is a microcontroller board base on theATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable to provide USB power and communication to the board. The Pro Mini Arduino is intended for semi-permanent installation in objects or exhibitions. The pin layout is compatible with the Mini Arduino. - Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Use For Atmel Atmega328P-AU microcontroller.
- Support serial download.
- Support 9V battery.
- Package Includes :
- 1 x Pro mini 5v/16mHZ compatible with arduino
Call for Price -
ARDUNIO UNO-R3 SMD Board compatible with Arduino
- Compatible with Arduino+ Easy To Use
- Digital Input/Output Pins are 14 (of which 6 can be used as PWM outputs), 6 analog inputs
- The Operating Voltage is 5V, DC Current for each input/output pin is 40 mA, DC Current for 3.3V Pin is 50 mA
- Flash Memory is 32 KB, SRAM is 2 KB
₹650 -
Arduino Nano ATmega328P
- Microcontroller Atmel ATmega328 SMD Package
- Operating Voltage (logic level) 5 V
- Input Voltage (recommended) 7-12 V
- Input Voltage (limits) 6-20 V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 8
- DC Current per I/O Pin 40 mA
- Flash Memory 32 KB (of which 2KB used by bootloader)
- SRAM 2 KB
- EEPROM 1 KB
- Clock Speed 16 MHz
- Dimensions 0.70” x 1.70”
₹550 -
Lilypad Arduino Atmega328P
Lilypad Arduino Atmega328P
Call for Price -
Call for Price
-
Call for Price
-
-
Arduino Kit For Beginneras NEPL-BE01
Kit Includes: 1 x UNO R3 Controller Board 1 x LCD 16X2 Module(with pin header) 1 x Rc522 RFID Module 1x LDR Module 1 x Power Supply Module 1 x GY-521(MPU-6050) Module 1 x Servo Motor(SG90) 1 x Stepper Motor 1 x ULN2003 Stepper Motor Driver Board 1 x HC-SR501 PIR Motion Sensor 1 x Sound Sensor Module 1 x Water Level Detection Sensor Module 1 x Ultrasonic Sensor 1 x Ds3231 RTC Module 1 x Rotary Encoder Module 1 x DHT11 Temperature and Humidity Module 1 x IR Receiver Module 1 x Joystick Module 1 x Remote 1 x MAX7219 Module 1 x 1-Digit 7 Segment Display 1 x 4-Digit 7 Segment Display 1 x L293D 1 x 74HC595 1 x Active Buzzer 1 x Passive Buzzer 2 x 10k/100K Potentiometer 1 x 5V Relay 1 x Fan Blade and 3-6 V Motor (with wire) 1 x Membrane Switch Module 1 x 830 Breadboard 1 x 9V Battery Connector with DC Pin 1 x 9V DC / 1 A Adapter 1 x 80 Jumper Wire 1 x USB Cable 150 x Resistor (Mix 1/4 Watts) 3 x Thermistor 1k/10k/100k 5xDiode Rectifier 1×1000/25V 2 x 10uF 50 V Electrolyte Capacitor 1 x 100uF 50 V Electrolyte Capacitor 5 x NPN Transistor(PN2222) 5 x NPN Transistor (S8050) 1 x Tilt Ball Switch 5 x Small Tactile Button 25X Mix colur LED 5 x 0.01 /103/10kpf Ceramic Capacitor 5 x 0.001/102/1 kpf Ceramic Capacitor 5 x 0.0022 Ceramic Capacitor 5X 0.047 Ciramic capacitor 5 x 0.1 /104/100 kpf Ceramic Capacitor 1 x RGB LED ₹3,500 -
Ardiuno junior Starter kit NEPL-JE01
Arduino junior starter kit includes :-
Arduino :- 1
LED :- 5
LDR :- 1
IR MODULE :- 1
Resistance :- 24
Tack Switch :- 2
Buzzer :- 1
jumper wires :- 30
single relay module :- 1
DC Motor :- 1
₹1,250