Arduino Mega 2560 Microcontroller Board Based
Roll over image to zoom in
₹850
- Microcontroller CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
Additional information
| Weight | 34 g |
|---|
The ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board is a micro-controller board base on the ATmega2560. It has a USB host interface to connect with Android based phones, base on the MAX3421e IC.
It has 54 digital input/output pins (of which 15 can be used as PWM outputs); 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator; a USB connection, a power jack, an ICSP header, and a reset button. The MEGA ADK is base on the Mega 2560. Similar to the Mega 2560 and Uno, it features an ATmega8U2 program as a USB-to-serial converter. Revision 3 of the Mega ADK board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU(Device Firmware Upgrade) mode.
| Model Type | Arduino MEGA 2560 |
| Microcontroller Chip | ATmega2560 |
| Operating Voltage (VDC) | 5 |
| Input Voltage(Recommended) | 7V to 12V |
| Input Voltage (limit) | 6V-20V |
| Analog I/O Pins | 16 |
| Digital I/O Pins | 54 (of which 15 provide PWM output) |
| Clock Speed | 16 MHz |
| Flash Memory | 256 KB |
| SRAM (KB) | 8 |
| EEPROM | 4 KB |
| DC Current for 3.3V Pin (mA) | 50 |
| DC Current per I/O Pin (mA) | 40 |
| Weight (gm) | 34 |
