Load Cell 3kg
₹400
This straight bar load cell (sometimes called a strain gauge) can translate up to 3 kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar.
Additional information
| Weight | 27 g |
|---|---|
| Package contents | 1 x Load Cell 3kg |
A load cell is a transducer that is used to create an electrical signal whose magnitude is directly proportional to the force being measured. The various types of load cells include hydraulic load cells, pneumatic load cells and strain gauge load cells.
This is a standard load cell for measuring weight up-to 3 Kg. The output of the load cell is in mili-volts and cannot be directly measured by a micro-controller. So an ADC with high resolution or an instrumentation amplifier is required to make the output of the load cell readable to a micro-controller.
| Model | YZC-131 |
| Material | Aluminium |
| Operating Voltage (VDC) | 10 5 |
| Dimensions in mm (LxWxH) | 75 x 12.7 x 12.7 |
| Weighing Range (Kg) | 0 ~ 3 |
| Rated Output | 1.0 ± 0.1mV / V |
| Non Linear Output | ± 0.03% F.S |
| Hysteresis | 0.03% F.S |
| Repeatability | 0.03% F.S |
| Creep | (5 minutes) 0.05% F.S |
| Cable Length (cm) | 18 |
| Zero Balance | ± 0.1 mV / V |
| Impedance (Ω) | 1066 ± 10% Ω |
| Output Impedance | 1000 ± 10% Ω |
| Operating Temperature Range (°C) | -21 to 40 |
| Weight (gm) | 27 |
| Protection | IP65 |
| Insulation Resistance (MΩ) | 2000 |
