Best Seller Items
-
-
MPU6050 – Triple Axis Gyro Accelerometer Module
- Chip built-in 16bit AD converter, 16-bit data output
- Driver Chip: MPU6050
- Operating Voltage: 3-5V DC
- Communication: I2C/IIC Protocol
- Gyro Range: ± 250, 500, 1000, 2000 °/s
- Accelerometer Range: ± 2 ± 4 ± 8 ± 16 g
₹250 -
₹21SMD 1206 Resistor (pack of 10pcs)
₹21 Select options This product has multiple variants. The options may be chosen on the product page -
Elcom ISS-6/16-5-Series SS-6/16-5-Series Rocker Switch
Elcom ISS-6/16-5-Series SS-6/16-5-Series Rocker Switch
₹75 -
De-Soldering Braid
Solder wick is a composed of copper threads braided together. Flux is normally added to help the solder flow from where it is not supposed to be (the jumper) to the wick. Hence, solder wick is sometimes called desolder braid. Yes, you really can solder anything, and solder wick is a large part of the process.
₹50
-
-
Arduino Kit For Beginneras NEPL-BE01
Kit Includes: 1 x UNO R3 Controller Board 1 x LCD 16X2 Module(with pin header) 1 x Rc522 RFID Module 1x LDR Module 1 x Power Supply Module 1 x GY-521(MPU-6050) Module 1 x Servo Motor(SG90) 1 x Stepper Motor 1 x ULN2003 Stepper Motor Driver Board 1 x HC-SR501 PIR Motion Sensor 1 x Sound Sensor Module 1 x Water Level Detection Sensor Module 1 x Ultrasonic Sensor 1 x Ds3231 RTC Module 1 x Rotary Encoder Module 1 x DHT11 Temperature and Humidity Module 1 x IR Receiver Module 1 x Joystick Module 1 x Remote 1 x MAX7219 Module 1 x 1-Digit 7 Segment Display 1 x 4-Digit 7 Segment Display 1 x L293D 1 x 74HC595 1 x Active Buzzer 1 x Passive Buzzer 2 x 10k/100K Potentiometer 1 x 5V Relay 1 x Fan Blade and 3-6 V Motor (with wire) 1 x Membrane Switch Module 1 x 830 Breadboard 1 x 9V Battery Connector with DC Pin 1 x 9V DC / 1 A Adapter 1 x 80 Jumper Wire 1 x USB Cable 150 x Resistor (Mix 1/4 Watts) 3 x Thermistor 1k/10k/100k 5xDiode Rectifier 1×1000/25V 2 x 10uF 50 V Electrolyte Capacitor 1 x 100uF 50 V Electrolyte Capacitor 5 x NPN Transistor(PN2222) 5 x NPN Transistor (S8050) 1 x Tilt Ball Switch 5 x Small Tactile Button 25X Mix colur LED 5 x 0.01 /103/10kpf Ceramic Capacitor 5 x 0.001/102/1 kpf Ceramic Capacitor 5 x 0.0022 Ceramic Capacitor 5X 0.047 Ciramic capacitor 5 x 0.1 /104/100 kpf Ceramic Capacitor 1 x RGB LED ₹3,500 -
Ardiuno junior Starter kit NEPL-JE01
Arduino junior starter kit includes :-
Arduino :- 1
LED :- 5
LDR :- 1
IR MODULE :- 1
Resistance :- 24
Tack Switch :- 2
Buzzer :- 1
jumper wires :- 30
single relay module :- 1
DC Motor :- 1
₹1,250 -
DPDT ROCKER SWITCH
DPDT Rocker Switches are great to control the direction of DC Motors. We have carefully selected the best Rocker Switch with a high load rating and perfect size to be used in Robotics. This rocker switch has three positions – the default center position, one on position and another off position. The rocker switch stays in the on or off position as long as it is being pressed down and returns to the default center position when not pressed. This feature can be used to control the direction of a DC Motor. With simple wiring as shown in the additional photos of the image, the switch can be used to drive a DC Motor in clockwise and in anti clockwise directions.
₹55 -
-
